AgriOps
Clover AI — Grazing

Your AI grazing advisor.Knows your farm.

Clover Grazing Assistant reads your live paddock covers, rotation and field notes — then gives you expert, farm-specific guidance on grazing management, surplus grass and supplementary feeding.

Get started
Pro feature — included with AgriOps Pro

What Clover Grazing can do

On first load, Clover analyses your current grass wedge and gives you an instant farm assessment. Then you can ask it anything about grazing.

Opening analysis

Good morning. I've reviewed your grass wedge for this morning: • Average Farm Cover: 1,840 kg DM/ha — slightly below your pre-grazing target of 2,800 • Paddocks 3 and 7 look suspiciously high at 3,400+ kg DM/ha — possible mis-recordings or they've been skipped • Your rotation is running 4 days behind at current covers I'd recommend closing Paddocks 3 and 7 for silage or topping. Want me to work out how much that would lift your AFC?
Ask Clover a question…

Rotation planning

We're getting to the end of the round — will I have enough grass?
Based on your 18 paddocks and current AFC of 1,650 kg DM/ha: You have roughly 12 days of grass ahead at current demand (120 cows × 13.5 kg DM = 1,620 kg DM/day total). Growth at 40 kg DM/ha/day adds ~720 kg/day across 18 ha — which helps, but you're likely to be tight in the last 3–4 paddocks. Options: 1. Buffer feed 2–3 kg DM silage/cow to reduce pressure 2. Skip one of the lighter paddocks this round 3. Accept shorter post-grazing residuals in the last paddocks Which suits your situation best?
Ask Clover a question…

Surplus management

I have 4 paddocks sitting above 3,200 — what should I do?
At 3,200+ kg DM/ha those paddocks are carrying too much — quality will be dropping fast (D-value likely below 65) and they'll cause rejection or poor residuals when you do graze them. Recommendation: Close all 4 for silage immediately. At your typical paddock size (~1.2 ha each) that's ~4.8 ha removed — expect 8–10 t/ha fresh weight if cut in the next few days. This will also bring your AFC down towards target and tighten up the rest of the round. Want me to estimate the silage tonnage you'd get?
Ask Clover a question…

Expert knowledge built in

Live wedge analysis

Clover reads your actual paddock covers and AFC on every conversation — not generic averages.

Rotation planning

Calculates days ahead, flags tight rotations and recommends whether to close paddocks or buffer feed.

Surplus detection

Spots paddocks that are too heavy, advises on topping or silage decisions before quality drops.

Nutrition at grass

Expert on milk yield from grass, DLWG targets and when to supplement — for dairy, beef and sheep.

Questions you can ask

“Is my rotation on track for the time of year?”

“I have 4 paddocks sitting over 3,200 kg DM/ha — what do I do?”

“Should I start buffer feeding? My grass is getting tight.”

“Audit my grass wedge and tell me where I need to improve”

“What DLWG should I expect from my beef cattle at grass this month?”

“My AFC has dropped 300 kg DM/ha in a week — is that normal?”

“Can I close 2 paddocks for silage without affecting my rotation?”

“How does my pre-grazing cover compare to AHDB targets for April?”

Included with AgriOps Pro

Clover Grazing Assistant is part of AgriOps Pro — alongside the Grass Wedge Planner, Feedy loading cards, Clover Feed Assistant and all Pro tools.

  • Clover Grazing Assistant — AI grazing advisor
  • Clover Feed Assistant — AI farm nutritionist
  • Grass Wedge Planner with live wedge chart
  • Feedy — TMR loading cards
  • Unlimited access to all tools
Upgrade to ProCreate a free account first