The loading card that lives in the cab.
Tell the loader operator the number to hit on the weigh bar after each ingredient — no mental arithmetic, no misreads, no wasted feed.
Built from your saved TMR mixes. Set the loading sequence once, then open Feedy on any phone or tablet in the cab.
Cumulative weigh bar reading after each ingredient
Operator notes per ingredient — add slowly, high rotor speed, etc.
Download as PDF — print and laminate for the cab
Works on any phone or tablet, no app to install
Winter Suckler TMR
120 head · 2,880 kg total · 24.0 kg/head
| Step | Ingredient | Add (kg) | Weigh bar (kg) |
|---|---|---|---|
| 1 | Grass silage (1st cut) | 1,440 | 1,440 |
| 2 | Maize silage | 840 | 2,280 |
| 3 | Soya bean meal Add with rotor running | 300 | 2,580 |
| 4 | Rolled barley | 240 | 2,820 |
| 5 | Beef minerals Add last — mix 3 min | 60 | 2,880 |
| Total Mix | 2,880 | 2,880 | |
| 24.0 kg per head · 120 head | |||
Add 300 kg soya. Weigh bar should read 2,580.
Instead of asking the operator to do running mental arithmetic while driving a loader, Feedy tells them the exact number to hit on the weigh bar after each ingredient. That single column is what makes Feedy useful rather than just another ingredient list.
Loading sequence editor
Drag ingredients into the loading order in the TMR calculator. Add per-ingredient notes for the operator — rotor speed, slow addition, where to add minerals.
Designed for the cab
Large text, high contrast, big touch targets. Works equally well on a phone in your pocket or a 10-inch tablet mounted in the tractor cab.
Printable PDF
Download a clean A5 loading card from any mix. Print it, laminate it, keep it in the cab as a backup — or share it with a relief operator.
Built from your TMR mixes
No separate data entry. Set your ration in the TMR Mix Calculator, save it, set the loading order — Feedy reads the same data automatically.
Three steps to a loading card
From ration to cab-ready card in minutes.
Build your ration
Add ingredients, quantities and head count in the TMR Mix Calculator. Save it as a named mix.
Open TMR CalculatorSet the loading order
Hover your saved mix and click the loading order icon. Drag ingredients into sequence and add any notes for the operator.
Open Feedy in the cab
Pull up /feedy on any device. Your loading card is ready — cumulative weigh bar readings already calculated.
Ready to try Feedy?
Create a free AgriOps account, build your first TMR mix, and have a loading card in the cab today.
Create free accountFeedy loading cards require a Pro subscription. Free trial available.